Portable turbidity meter, SKU: 600320, Turb® 430 IR - WTW Germany

• Turbidity measurement acc. To DIN ISO 27027 for any demand up tp 1100 NTU with lab option
  Turb® 430 IR meet the requirements of nephelometric measurement at 90° stray light for drinking water with highest precision particularly suitable in the range < 1 NTU and is therefore suitable for water analysis,control, such, fuel, cell cultures, food and  beverage industries and (health) administration surveillance.

  
  • Measuring range comprises 0.02 -1100 NTU/FNU with automatic measuring range switching
  • Adjustable calibration intervals and GLP-compliant documentation
  • Stray light behavior according to pharmacopoeia 5.0
  • Higly precise AMCO Clear® Standards
  The measurement and automatic 3-point calibration runs menu-guided. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata . The quality assurance of the measured results is supported by calibration interval setting with documentation. This makes Turb® 430 not only a portable meter – also available in a practical field set - but also a precise and reliable benchtop meter for applications of up to 1100 NTU/FNU with optimized data administration!
  
  
  
  AMCO Clear® standards
  
  Polymer calibration standards resist against Formazine by significantly higher accuracy and stability without drifting, which increases the measuring accuracy significantly:
  •Manufacturing tolerance of only ±1% for highest result accuracy
  •Long-term stable particle distribution and size
  •No health hazard
  •Easy to dispose of
  •N.I.S.T. traceability

  
  

  Specification :

  
  

  • Method	Nephelometrisch (90° Straylight)
    Light Source	IR LED 830-890 mm
    acc. to Standard Method	DIN EN ISO 7027-1
    Measuring Range	0-1100 FNU/NTU
    Resolution	0,01 for 0,02 -9,99
    	0,1 for 10 – 99,90
    	1 for 100 - 1100
    Accuracy	0.01 NTU or +/- 2% of meas.value
    Reproducability	< 0.5%
    Calibration	Preset standard 3 point Cal, selectable 2-5 point (FreeCal), 1P QuickCal
    Calibration Protocol	yes
    Calibration Interval	yes
    Data Storage	2000 values
    Response Time	Ca. 3 s
    Cuvette	28 x 60 mm, 20 ml Sample Volume
    Ident Number	yes
    Firmware-Update	yes
    Interface	RS 232, USB via Adapter (optional)
    Operation Temp.	0... +50°C
    Power Supply	4 Mignon (AA) > 3000 Measurements
    Rech.Batt.	optional
    Data Management GLP compliant	optional PC software LSdata
    LabStation+ PC-Software LSdata	optional as small benchtop solution